MGF Hydraulic
Rotary Drum Cutters as attachment to Hydraulic
Excavators |
model | HF | 7 | 12 | 18 | 30 | 47 | 75 |
Torque max. | kNm | 7,5 | 12,5 | 17,9 | 29,8 | 46,7 | 74,6 |
ft.lbs | 5532 | 9220 | 13202 | 21979 | 34444 | 55022 | |
Torque at 320 bar | kNm | 6,4 | 10,7 | 15,3 | 25,4 | 42,4 | 63,6 |
at 4640 psi | ft.lbs | 4720 | 7892 | 11285 | 18734 | 31273 | 46909 |
Cutting Force max. | kN | 28,9 | 40,4 | 52,7 | 87,7 | 116,9 | 135,6 |
tons | 3.24 | 4.53 | 5.91 | 9.84 | 13.12 | 15.21 | |
Down Pressure max. | kN | 30 | 32 | 40 | 50 | 120 | 150 |
tons | 3.37 | 3.59 | 4.49 | 5.61 | 13.46 | 16.83 | |
Speed min.-max. | rpm | 0 - 150 | 0 - 125 | 0 - 115 | 0 - 70 | 0 - 60 | 0 - 40 |
Cutting Drum Speed max. | m/sec | 4,08 | 4,06 | 4,09 | 2,49 | 2,67 | 2,3 |
ft/sec | 13.39 | 13.32 | 13.42 | 8.17 | 8.76 | 7.55 | |
Oil Pressure max. 1) | bar | 375 | 375 | 375 | 375 | 375 | 375 |
psi | 5439 | 5439 | 5439 | 5439 | 5439 | 5439 | |
Oil Flow max. 2) | l/min | 189 | 262 | 346 | 350 | 500 | 500 |
gpm | 50 | 69 | 91 | 92 | 132 | 132 | |
Hydraulic Power max. | kW | 50 | 70 | 90 | 140 | 200 | 240 |
HP | 67 | 94 | 121 | 188 | 268 | 322 | |
Torque per 100 bar | kNm | 2,0 | 3,34 | 4,78 | 7,95 | 13,25 | 19,88 |
ft.lbs | 1475 | 2463 | 3526 | 5864 | 9773 | 14663 | |
Oil demand per revolution | Liter | 1,26 | 2,1 | 3,0 | 5,0 | 8,3 | 12,5 |
gal | 0.33 | 0.55 | 0.79 | 1.32 | 2.19 | 3.30 | |
Cutting Drum Diameter | mm | 520 | 620 | 680 | 680 | 850 | 1100 |
in | 20 | 24 | 27 | 27 | 33 | 43 | |
Cutting Drum Width | mm | 1000 | 1200 | 1250 | 1500 | 1800 | 2000 |
in | 39 | 47 | 49 | 59 | 71 | 79 | |
Cutter Bits 3) | Number | 60 | 60 | 60 | 76 | 114 | 152 |
Round Shank Cutter Bit 3) | Type | RM 5 | RM 8 | RM 8 | RM 8 | RM 8 | RM 8 |
Weight approx. 4) | kg | 580 | 1220 | 1360 | 2650 | 4200 | 6800 |
lbs | 1279 | 2690 | 2998 | 5842 | 9259 | 14991 | |
Recommened Hydraulic Excavator | |||||||
Diesel Engine Rating | kW | 40 - 60 | 55 - 85 | 70 - 110 | 110 - 170 | 160 - 240 | 190 - 290 |
HP | 54 - 80 | 74 - 114 | 94 - 148 | 148 - 228 | 215 - 322 | 255 - 389 | |
Service Weight | t | £ 15 | £ 30 | £ 35 | £ 50 | £ 75 | £ 100 |
Subject to constant improvement and engineering progress we reserve the right to make changes of specification without notice. |
1) At lower operating pressure the torque and cutting force is lower.
2) At lower oil flow the speed is lower.
3) Standard model. Other tool assemblies on request according to need and application.
Various tools for severe and extremly abrasive conditions and more wear-resistant quality of high tensile strength are available.
4) Weight without adaptor and set of hydraulic hoses.
MGF Geotec GmbH - Industriestraße - D-53577
Neustadt/Fernthal - Germany Tel. +49 2683 983-0 - Fax +49 2683 983-200 |